Where firefighters come to talk training

Hydraulic Elevator room on roof!

We are fairly familiar with the elevators in our jurisdiction and today my Ladder company found something a little unusual.
All of the hydraulic elevator rooms I have ever seen have been either on the 1st floor near the shaft or in the basement near the shaft. This is also what I have been taught by tradesman and experienced firemen. Top floor or roof mounted elevator rooms have been for cable elevators. Today we found a roof mounted hydraulic passenger elevator control room on the roof of a 3 story commercial building when we could not locate the elevator room on the 1st floor or basement/parking garage.
This is also a rare manufacturer in this region. It is a "GMV" out of Italy. Ontario, Canada is the only North American importer for this elevator and equipment/parts. The manual hydraulic dump valve in the control room was unique as well and it included shutting off a ball valve after the dump valve had been activated to lower the elevator to the desired floor. I believe it's a hydraulic safety of some sort. I'm curious if anyone else has seen this type/manufacturer of elevators in their area before and any experiences with training or incidents involving them. It wasn't earth shattering that's for sure, just a little interesting.
FYI - This elevator was in the city of Mill Creek, within Snohomish County, Washington.

Leatherly,

Chad Berg
Ladder co. 72
Snohomish County, WA

Replies to This Discussion

PermalinkReply byChad BergonJuly 31, 2008 at 7:11pm

Anybody out there?

Julie?

PermalinkReply byBarry ApttonOctober 23, 2008 at 6:23pm

I haven't seen it yet BUT I will keep my eye out. Thanks for the info.

PermalinkReply byJohn O'DonoghueonDecember 2, 2008 at 6:26pm

Hi Chad; Sorry for the delay, but I've dropped the ball about getting to the page for a while. As for Hydro machine rooms, they are usually in a room on the first floor or the basement. That is a standard location, but if the installer needs a "strange" location, then he seeks a variance from the local AHJ who handles elevators. I have found them on the 2nd floor of a 3 story rise hydro, so the roof doesn't surprise me, even though it is infrequent. It does not matter where it is originally from, as all elevators must be installed according to ASME A 17.1 Safety Code for New Elevators. That is the code for all of North America. And yes Chad, I am out there. Sorry for the delay. By the way, Julie has left PennWell for another job. I miss her , as she was our book contact person.

Chad Berg said:

Anybody out there?

Julie?

PermalinkReply byBarry ApttonDecember 2, 2008 at 8:28pm

Chief,

How does the hydraulic system operate the elevator if above the elevator? do the lines get run differently?

PermalinkReply byJohn O'DonoghueonDecember 2, 2008 at 9:51pm

嗨巴里;还是只是一种泵,pre传递ssure to the hydraulic fluid, causing the piston inside the cylinder to be pushed up, or released down by removing the pressure in a controlled action. If this is a Roped Hydro, this concept gives a 2 to 1 differential. A 20 foot piston , with a Roped addition, would get a 40 foot lift.

PermalinkReply byChad BergonJanuary 11, 2009 at 2:05am

Chief,

Thanks for the information and it's very informative. Have you heard of that elevator manufacture before?

PermalinkReply byJohn O'DonoghueonJanuary 11, 2009 at 9:06am

Chad Berg said:

Chief,

Thanks for the information and it's very informative. Have you heard of that elevator manufacture before?

PermalinkReply byJohn O'Donoghueon2009年1月11日,在9:15am

Good Morning Chad;
GMV is a world-wide company, but they are not in the US yet. The Canadian company is probably doing their work here. As long as they meet the ASME A 17.1 Safety Code, and your local or state AHJ's approve it, there would be no problem. Speak with an elelvator person that you know, and they can fill you in. Stay safe. John

RSS

Welcome to
火Engineering Training Community

Sign Up
orSign In

Or sign in with:

Policy Page

PLEASE NOTE

The login aboveDOES NOTprovide access to Fire Engineering magazine archives.Please go here for our archives.

CONTRIBUTORS NOTE

Our contributors' posts are not vetted by the火Engineering technical board, and reflect the views and opinions of the individual authors. Anyone is welcome to participate.

For vetted content, please go towww.sacthai.com/issues.

We are excited to have you participate in our discussions and interactive forums. Before you begin posting, please take a moment toread our policy page. --Bobby Halton

Be Alert for Spam
We actively monitor the community for spam, however some does slip through. Please use common sense and caution when clicking links. If you suspect you've been hit by spam, e-mailpeter.prochilo@clarionevents.com.